NDAlcatel

Un article de IPv6.

Tunnel Juniper Table des matières Préfixe Cisco
-> # Visualisation de l'état de l'interface
-> show ipv6 interface monReseau2
602
  IPv6 interface index = 602(0x0000025a)
  Administrative status = Enabled
  Operational status = Active
  Hardware address = 00:D0:95:93:C6:81
  Link-local address(es):
    fe80::2d0:95ff:fe93:c681/ 64
  Global unicast address(es):
    2001:660:3208:2::3/ 64
  Anycast address(es):
    2001:660:3208:2::/ 64
  Joined group addresses:
   ff02::1:ff00:0
   ff02::1:ff00:3
   ff02::2
   ff02::2:fc34:c5a5
   ff02::1
   ff02::1:ff93:c681
  Maximum Transfer Unit (MTU) = 1500
  Send Router Advertisements = Yes
  Maximum RA interval (sec) = 300
  Minimum RA interval (sec) = 99
  RA managed config flag = False
  RA other config flag = False
  RA reachable time (ms) = 30000
  RA retransmit timer (ms) = 1000
  RA default lifetime (sec) = 900
  Packets received = 17
  Packets sent = 829
  Bytes received = 1294
  Bytes sent = 83540
  Input errors = 0
  Output errors = 2
  Collisions = 0
  Dropped = 0
-> # Le préfixe attribué lors de la configuration de l'interface est
-> # annoncé par défaut. Pour arrêter L'annonce :
-> ipv6 interface monReseau2 ra-send no
-> show ipv6 interface monReseau2
... 
Maximum Transfer Unit (MTU) = 1500
Send Router Advertisements = no
Maximum RA interval (sec) = 300
...
->

Tunnel Juniper Table des matières Préfixe Cisco
HOME